目前分類：未分類文章 (185)
- Dec 04 Fri 2020 14:00
SERRATION UNDER HEAD SERIES
- Dec 03 Thu 2020 14:00
AIR PULL SETTER
AIR PULL SETTER
CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently
INSTALL BLIND RIVET NUT BY AIR PULL SETTER
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently
INSTALL BLIND RIVET NUT BY AIR PULL SETTER
★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut.
LG-807 without pulling nut.
- Dec 02 Wed 2020 14:00
SEAL RIVET NUT
SEAL RIVET NUT
MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL
SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT
CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.
APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT
CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.
APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Dec 01 Tue 2020 14:00
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT, OPEN END FHSM & FHSI
FULL-HEXAGON RIVET NUT
FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END
- Nov 30 Mon 2020 14:00
HALF-HEXAGON W. SMALL FLANGE RIVET NUT, OPEN END HSM, HSI
HSM, HSI SERIES
HALF-HEXAGON W. SMALL FLANGE RIVET NUT
HEX FLANGE, HEX INTERNAL HOLE, OPEN END
HEX FLANGE, HEX INTERNAL HOLE, OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION
- Nov 27 Fri 2020 14:00
HALF-HEXAGON RIVET NUT HBM & HBI
HALF-HEXAGON RIVET NUT
HBM & HBI SERIES
HALF-HEXAGON WITH BIG FLANGE RIVET NUT FLAT HEAD,ROUND INTERNAL HOLE,OPEN END
HALF-HEXAGON WITH BIG FLANGE RIVET NUT FLAT HEAD,ROUND INTERNAL HOLE,OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
AHBM & AHBI SERIES
HALF-HEXAGON WITH SMALL FLANGE RIVET NUT
FLAT HEAD,HEX INTERNAL HOLE,OPEN END
HALF-HEXAGON WITH SMALL FLANGE RIVET NUT
FLAT HEAD,HEX INTERNAL HOLE,OPEN END
- Nov 26 Thu 2020 13:48
E SELF-DRIVING NUT
E SELF-DRIVING NUT
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL AND BRASS
ADVANTAGES:
1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.
2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.
3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
4.INSTALL INTO VARIES MATERIAL.
5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.
6.EASY, FAST & SAFE INSTALLATION.
INSTRUCTIONS OF E-SELF DRIVING NUT:
AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.
FEATURE OF E-SELF DRIVING NUT
(COMPARE WITH SEX BOLTS)
I. ROUND BODY WITH FANGSON IT
1.GRIP THE APPLICATION TIGHTLY
2.CANNOT BE DISASSEMBLED EASILY
3.PREVENT ANY ONE WHO INTENT TO PULL OUT
II. SCREW HEADCAN BE YOUR CHOICE
1.THE SCREW HEAD CAN BE TAMPERPROOF
2.HARDLY TO DISASSEMBLED
3.COMBINE WITH GOOD SURFACE OUTLOOK
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 25 Wed 2020 13:48
BUTTON HEAD SOCKET TROX WITH PIN SCREWS
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEMALE NUT
- Nov 24 Tue 2020 13:48
ARCHITECTURAL SEX BOLTS
建築用公母套
ARCHITECTURAL SEX BOLTS
材質：鐵、白鐵、鋁、銅。
特色 & 優點：母套頭型採半圓頭設計，搭配的螺絲採十字平頭設計、於安裝時將母套置於外露地方，
螺絲置於後方，因母套頭型無工具可拆除，具防盜功能、可安裝於多種材質之物件、
安裝容易、快速、省力且安全、可應用的範圍廣，多使用於門窗五金、建築五金
★ 其他尺寸和材質可依客戶要求訂製。
特色 & 優點：母套頭型採半圓頭設計，搭配的螺絲採十字平頭設計、於安裝時將母套置於外露地方，
螺絲置於後方，因母套頭型無工具可拆除，具防盜功能、可安裝於多種材質之物件、
安裝容易、快速、省力且安全、可應用的範圍廣，多使用於門窗五金、建築五金
★ 其他尺寸和材質可依客戶要求訂製。
- Nov 23 Mon 2020 13:48
ONE WAY SEX BOLTS
單向公母套
ONE WAY SEX BOLTS
單向公母套之材質： 鐵、白鐵、銅。
單向公母套之表面處理： 依客戶要求。
★ 其他尺寸和材質可依客戶要求訂製。
單向公母套之表面處理： 依客戶要求。
★ 其他尺寸和材質可依客戶要求訂製。
母套
螺絲
- Nov 20 Fri 2020 13:48
SIX LOBE WITH PIN SEX BOLT
梅花帶PIN公母套
SIX LOBE WITH PIN SEX BOLT
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEMALE NUT
MALE SCREW
- Nov 19 Thu 2020 13:48
TRUSS COMBO HEAD POST SCREW
TRUSS COMBO HEAD POST SCREW
CHICAGO SCREW
CHICAGO SCREW
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 18 Wed 2020 13:48
SLOTTED TRUSS HEAD SEX BOLTS
SLOTTED TRUSS HEAD SEX BOLTS
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 17 Tue 2020 13:48
TSC 8 BLIND PRESSED NUTS
TSC 8 BLIND PRESSED NUTS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 16 Mon 2020 13:48
TSC 7 SELF-CLINCHING STANDOFFS
TSC 7 SELF-CLINCHING STANDOFFS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 13 Fri 2020 13:48
TSC 6 SELF-CLINCHING STUDS
TSC 6 SELF-CLINCHING STUDS
MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS:
STEEL, STAINLESS STEEL
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STUDS：
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 12 Thu 2020 13:48
TSC 5 SELF-CLINCHING STANDOFFS
TSC 5 SELF-CLINCHING LOCK NUTS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 11 Wed 2020 13:48
TSC 4 SELF-CLINCHING STANDOFFS
TSC 4 SELF-CLINCHING NUTS
INSTALL THE CLINCHING PART - TSC4
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 10 Tue 2020 13:48
TSC 1 SELF-CLINCHING STANDOFFS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 09 Mon 2020 13:48
WELDING STUD
WELDING STUD
MATERIAL AVAILABLE:
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
Company Profile (2)
