FULL-HEXAGON RIVET NUT
FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SEAL RIVET NUT
MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL
SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT
CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.
APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
AIR PULL SETTER
CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently
INSTALL BLIND RIVET NUT BY AIR PULL SETTER
★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut.
topscrew1975 發表在 痞客邦 留言(0) 人氣()
topscrew1975 發表在 痞客邦 留言(0) 人氣()
topscrew1975 發表在 痞客邦 留言(0) 人氣()
HIGHT SHEAR STRENGTH BLIND RIVET
MATERIAL AVALIABLE:
RIVET: STEEL
SHAFT: STEEL
ADVANTAGES OF HIGH SHEAR STRENGTH BLIND RIVER:
1.EASY & FAST INSTALLATION
2.HIGH FASTENING STRENGTH
3.THE MANDREL WILL BE CUT OFF OUTSIDE OF BODY AFTER RIVETING FOR INCREASING THE SHEAR STRENGTH
4.THE SHEAR STRENGTH IS ALMOST TWICE THAN THE ORIGINAL RIVET
5.SUITABLE FOR CONTAINER, BODY WORK, ELECTRIC CABINET, AND CONCTRUCTION ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ALL STEEL BLIND RIVET V.S. HIGH SHEAR STRENGTH BLIND RIVER
HEAD
SIDE
INSPECTION REPORT OF SHEAR STRESS
topscrew1975 發表在 痞客邦 留言(0) 人氣()
ALUMINUM / STEEL BLIND RIVET
TS.AAS. SERIES
MATERIAL AVALIABLE:
RIVET: ALUMINUM 5050
SHAFT: STEEL 1018~1022
FINISH SURFACE AVALIABLE:
RIVET: SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED...ETC
SHAFT: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED
ADVANTAGES OF AL-ST BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.IDEAL FOR RUST RESISTANCE APPLICATION.
7.IDEAL FOR LIGHT WEIGHT USAGE.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
PLUSNUT - PRE-BULBED
( QUAD FOLDING RIVETNUTS / SPLIT NUT )
FEATURES：
1.SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.
2.WIDE GRIP RANGE.
3.FASTENS SECURELY IN UNEVEN SURFACES.
4.INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).
5.THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.
6.SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.
APPLICATIONS：
1.AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)
2.AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)
3.TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING. 4.DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.
5.PLASTIC FABRICATIONS：ELECTRONICS, ENCLOSURES...ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
TS600 AIR RIVETING NUT TOOL
NOSE - CHOOSE THREE FROM :
M4, M5, M6, M8, M10, M12
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16
★ Can choose FIVE pulling nut.
CHARACTERRISTICS OF TS600 RIVETING NUT TOOL：
1.Large working torque
2.Semi-automatic spin-pull technology.
3.Compact, Ergonomically designed tool.
4.Stroke adjustment is quick and easy.
5.Safety; no electrical shock; no heat generated
6.Install without producing any harmful mark
7.High pull forces required to place large diameter inserts.
8.Change thread sizes or adjust stroke is done outside of the tool.
9.Under an easy pneumatic operation, a high performance can be achieved efficiently.
topscrew1975 發表在 痞客邦 留言(0) 人氣()
BLIND RIVET NUT-WATERPROOF
FLAT HEAD RIVET, CLOSED END
BEM-C, BAI-C SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL,
GENERAL LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SMALL FLANGE & FLAT HEAD BLIND RIVET NUT
SMALL FLANGE BLIND RIVET NUT, OPEN END
SEM, SAM, SAI SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT. THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL,
LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
FLAT HEAD BERYNUT, OPEN END
BEM, BAI, SERIES
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SPLINED RIVET NUT
SMALL FLANGE, SPLINED RIVET NUT
TSSS SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: EASY AND FAST INSTALLATION,
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
LARGE FLANGE, SPLINED RIVET NUT
TSBS SERIES
topscrew1975 發表在 痞客邦 留言(0) 人氣()
topscrew1975 發表在 痞客邦 留言(0) 人氣()
FULL-HEXAGON RIVET NUT
FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END
topscrew1975 發表在 痞客邦 留言(0) 人氣()
HSM, HSI SERIES
HALF-HEXAGON W. SMALL FLANGE RIVET NUT
HEX FLANGE, HEX INTERNAL HOLE, OPEN END
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SEAL RIVET NUT
MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL
SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT
CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.
APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
AIR PULL SETTER
CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently
INSTALL BLIND RIVET NUT BY AIR PULL SETTER
★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut.
topscrew1975 發表在 痞客邦 留言(0) 人氣()
topscrew1975 發表在 痞客邦 留言(0) 人氣()
ST SERIES
KNURLED THREAD INSERT
Top Screw ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.
ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.
The material for ST series can be Steel and Stainless Steel.
Further information about recommended hole size, grip range and application thickness. Please refer below table.
APPLICATION: ST series Threaded insert is commonly used in any industry including automobile industry.
MATERIAL AVALIABLE: STEEL
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
TS600 AIR RIVETING NUT TOOL
NOSE - CHOOSE THREE FROM :
M4, M5, M6, M8, M10, M12
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16
★ Can choose FIVE pulling nut.
CHARACTERRISTICS OF TS600 RIVETING NUT TOOL：
1.Large working torque
2.Semi-automatic spin-pull technology.
3.Compact, Ergonomically designed tool.
4.Stroke adjustment is quick and easy.
5.Safety; no electrical shock; no heat generated
6.Install without producing any harmful mark
7.High pull forces required to place large diameter inserts.
8.Change thread sizes or adjust stroke is done outside of the tool.
9.Under an easy pneumatic operation, a high performance can be achieved efficiently.
topscrew1975 發表在 痞客邦 留言(0) 人氣()
Company Profile (2)
