WELDING STUD NUT
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
目前分類：未分類文章 (185)
- Nov 06 Fri 2020 13:48
WELDING STUD NUT
- Nov 05 Thu 2020 13:48
Vented Screw
Vented screw
vented screws provide a path for trapped air to be pumped away from the bottoms, sides, and shoulders of blind-tapped holes.
- Nov 04 Wed 2020 13:48
Groove Pin
GROOVED PIN
GROOVED PINS ARE NON-THREADED PRESS FIT FASTENERS THAT COMBINE HOLDING POWER, SHOCK RESISTANCE AND EASY TO INSTALL. GROOVED PINS ARE SOLID CYLINDRICAL PIN WITH THREE LONGITUDINCAL GROOVES, MANUFACTURED FORM BAR OR COIL STOCK.
ADVANTAGE OF GROOVED PIN:
1.GROOVED PINS ARE SOLID
2.THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
3.ONLY REQUIRE A STRAIGHT DRILLED HOLE.
4.EASY TO INSTALL AND QUICK TO ASSEMBLY.
5.REMOVABLE AND REUSABLE.
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ADVANTAGE OF GROOVED PIN:
1.GROOVED PINS ARE SOLID
2.THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
3.ONLY REQUIRE A STRAIGHT DRILLED HOLE.
4.EASY TO INSTALL AND QUICK TO ASSEMBLY.
5.REMOVABLE AND REUSABLE.
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 03 Tue 2020 13:48
glass breaker
GLASS BREAKER
THE BEST EQUIPMENT FOR ESCAPE
(Taiwan Patent No I442953)
A IDEAL SAFETY DEVICE USED IN VEHICLES, HOME OR WORK PLACE TO BREAK THROUGH WINDOW GLASS IN AN EMERGENCY.
THIS ITEM WE DESIGN IT GOING TO BE USED IN THE BUS, CAR, BUILDING(ESPECIALLY FOR OFFICE BUILDING)..ETC.
(Taiwan Patent No I442953)
A IDEAL SAFETY DEVICE USED IN VEHICLES, HOME OR WORK PLACE TO BREAK THROUGH WINDOW GLASS IN AN EMERGENCY.
THIS ITEM WE DESIGN IT GOING TO BE USED IN THE BUS, CAR, BUILDING(ESPECIALLY FOR OFFICE BUILDING)..ETC.
USUALLY THE “GLASS BREAKER” IS FORM AS A PIN AND HUGE STRENGTH MIGHT BE NEEDED WHEN USING, HOWEVER, OUR INVENTION IS TO BE DESIGNED AS “PUSH DOWN” FUNCTION WHICH IS EASY WHEN PEOPLE DURING EMERGENCY SITUATION.
FEATURES:
1.PRACTICAL FOR CAR USE IN EMERGENCY
2.SMASHING WINDOW EASY & QUICKLY
3.STRONG DESTRUCTION
4.HIGH QUALITY
FEATURES:
1.PRACTICAL FOR CAR USE IN EMERGENCY
2.SMASHING WINDOW EASY & QUICKLY
3.STRONG DESTRUCTION
4.HIGH QUALITY
- Nov 02 Mon 2020 13:48
FRAME SCAFFOLDING FLIP LOCK PIN
FRAME SCAFFOLDING FLIP LOCK PIN
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
APPLICATION IN FRAME SCAFFOLDING
APPLICATION IN FRAME SCAFFOLDING
- Oct 30 Fri 2020 13:48
UNDERCUT ANCHOR,EXPANSION ANCHOR
EXPANSION ANCHOR
UNDERCUT ANCHOR
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEATURES OF ANCHOR BOLT:
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED
ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:
FEATURES OF ANCHOR BOLT:
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED
ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:
ADVANTAGE & BENEFIT OF ANCHOR BOLT:
1.INVISIBLE FROM FRONT OF FAÇADE
2.STRESS-FREE FIXING IN NATURAL STONE
3.MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
4.FAST & EASY INSTALLATION OF REVEAL
5.STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%
FIELDS OF APPLICATION:
1.CURTAIN WALL INSTALLATION
2.BUILDING CURTAIN GLASS INSTALLATION
3.MARBLE INSTALLATION
4.STRENGTHENED GLASS INSTALLATION
EXAMPLE:
- Oct 29 Thu 2020 16:52
BINDING POST
BINDING POST
CHICAGO SCREW
CHICAGO SCREW
MATERIAL AVALIABLE:
ALUMINUM, BRASS, STAINLESSSTEEL
SURFACE FINISH AVALIABLE:
CLEAN
GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ALUMINUM, BRASS, STAINLESSSTEEL
SURFACE FINISH AVALIABLE:
CLEAN
GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 28 Wed 2020 16:46
SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE
SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE
W. THREE CUTTING HOLE
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
- Oct 27 Tue 2020 16:45
SELF TAPPING THREADED INSERT W. SLOTTED PIN
SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE
W. THREE CUTTING HOLE
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
- Oct 26 Mon 2020 16:21
SELF TAPPING THREAD INSERTS - SLOTTED SERIES
SELF TAPPING THREAD INSERTS
SLOTTED SERIES
SLOTTED SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.
APPICATIONS:
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.
APPICATIONS:
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
SELF TAPPING THREAD INSERTS - SLOTTED SERIES
- Oct 23 Fri 2020 16:08
SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS
SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
MANUAL INSTALLATION TOOLS
I. HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 22 Thu 2020 15:45
LOKSERT-TOOL
LOKSERT-TOOL
- Oct 21 Wed 2020 15:01
LOKSERT-STANLESS
LOKSERT-STANLESS
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
- Oct 20 Tue 2020 16:44
LOKSERT-STEEL
LOKSERT-STEEL
Solid bushing utilising locking keys provides positive mechanical lock against rotation.
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
Solid bushing utilising locking keys provides positive mechanical lock against rotation.
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
- Oct 16 Fri 2020 16:32
MALE FEMALE RIVET
MALE FEMALE RIVET
MATERIAL: ALUMINUM 5052 BRASS 2600 STAINLESS STEEL 302 / 410
APPLICATION : TABLEWARE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
APPLICATION : TABLEWARE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 15 Thu 2020 16:32
REBITADOR MANUAL
REBITADOR MANUAL
WEIGHT：0.6kg (1.32lb)
RIVET SIZE：2.4mm(3/32"),3.2mm(1/8"),4.0mm(5/32"),4.8mm(3/16").
RIVET MATERIAL：ALUMINUM & BRASS
RIVET FETURE：
1.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
2.EASY, FAST & SAFE INSTALLATION.
RIVET SIZE：2.4mm(3/32"),3.2mm(1/8"),4.0mm(5/32"),4.8mm(3/16").
RIVET MATERIAL：ALUMINUM & BRASS
RIVET FETURE：
1.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
2.EASY, FAST & SAFE INSTALLATION.
- Oct 14 Wed 2020 16:29
STAINLESS STEEL & STEEL BLIND RIVET TS.SSAS. SERIES
STAINLESS STEEL / STEEL BLIND RIVET
TS.SSAS SERIES
TS.SSAS SERIES
MATERIAL AVALIABLE:
RIVET: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
SHAFT: STEEL 1018~1022
FINISH SURFACE AVALIABLE:
RIVET: SELF COULOURED
SHAFT: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED
ADVANTAGES OF SS-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM OR STEEL.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RIVET: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
SHAFT: STEEL 1018~1022
FINISH SURFACE AVALIABLE:
RIVET: SELF COULOURED
SHAFT: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED
ADVANTAGES OF SS-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM OR STEEL.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 13 Tue 2020 16:29
ALL STAINLESS STEEL BLIND RIVET TS. SSASS. SERIES
ALL STAINLESS STEEL BLIND RIVET
TS.SSASS SERIES
TS.SSASS SERIES
MATERIAL AVALIABLE:
RIVET: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
SHAFT: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
FINISH SURFACE AVALIABLE:
RIVET: SELF COULOURED
SHAFT: SELF COULOURED
ADVANTAGES OF SS-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM OR STEEL.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RIVET: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
SHAFT: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
FINISH SURFACE AVALIABLE:
RIVET: SELF COULOURED
SHAFT: SELF COULOURED
ADVANTAGES OF SS-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM OR STEEL.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 12 Mon 2020 16:02
ALL STEEL BLIND RIVET TS.SAS. SERIES
ALL STEEL BLIND RIVET
TS.SAS. SERIES
TS.SAS. SERIES
MATERIAL AVALIABLE:
RIVET: STEEL 1006
SHAFT: STEEL 1018~1022
FINISH SURFACE AVALIABLE:
PLATING: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED/ CR3 ZINC NICKEL PLATED...ETC
COLOURED: YELLOW/ RED/ BLACK/ WHITE...ETC.
ADVANTAGES OF S-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RIVET: STEEL 1006
SHAFT: STEEL 1018~1022
FINISH SURFACE AVALIABLE:
PLATING: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED/ CR3 ZINC NICKEL PLATED...ETC
COLOURED: YELLOW/ RED/ BLACK/ WHITE...ETC.
ADVANTAGES OF S-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM.
7.IDEAL FOR RUST RESISTANCE APPLICATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 09 Fri 2020 16:01
STRETCH FOLDING BLIND RIVET ( TRI FOLD BLIND RIVET )
STRETCH FOLDING BLIND RIVET
( TRI FOLD BLIND RIVET )
( TRI FOLD BLIND RIVET )
MATERIAL AVALIABLE:
RIVET: ALUMINUM 5050
MANDREL: ALUMINUM 5056
POSITIVE: RATTLE FREE FASTENER
CORROSION RESISTANT:
ALL ALUMINUM CONSTRUCTION
MULTIGRIP:
ADJUSTS TO A WIDE VARIATION OF SUBJECT'S THICKNESS.
FINISH AVAILABLE IN A MULTIPLE COLOR.
SUITABLE APPLICATIONS:
SUPPORTS BRTTLE THIN SOFT OR DUCTILE MATERIALS & FUNCTIONS WHEN USED WITH OVERSIZED, ISALIGNED OR IRREGULARLY SHAPED HOLES.
THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPOING-UP & A LARGE BLIND SIDE BEARING SURFACE.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RIVET: ALUMINUM 5050
MANDREL: ALUMINUM 5056
POSITIVE: RATTLE FREE FASTENER
CORROSION RESISTANT:
ALL ALUMINUM CONSTRUCTION
MULTIGRIP:
ADJUSTS TO A WIDE VARIATION OF SUBJECT'S THICKNESS.
FINISH AVAILABLE IN A MULTIPLE COLOR.
SUITABLE APPLICATIONS:
SUPPORTS BRTTLE THIN SOFT OR DUCTILE MATERIALS & FUNCTIONS WHEN USED WITH OVERSIZED, ISALIGNED OR IRREGULARLY SHAPED HOLES.
THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPOING-UP & A LARGE BLIND SIDE BEARING SURFACE.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
Company Profile (2)
