(未設定內容)
MOTORCYCLE PARTS - SPOKE NIPPLE
MATERIAL AVAILABLE:
ALUMINUM 7075
FINISH SURFACE:
ANODIC TREATMENT
COLORS:
BLUE, RED, GREEN, GOLD, SILVER, BLACK
★ENHANCE THE LOOK OF YOUR WHEELS!
contact us :
Tel:+886-4-7237159
E-mail:recept@topscrew.com.tw
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
MULTI-GRIP BLIND RIVET
MATERIAL AVALIABLE:
RIVET: ALUMINUM 5052
MANDREL: STEEL 1022
SUITABLE APPLICATIONS:
1.AUTOMOBILES, MOTORCYCLES, ELECTRCAL APPLIANCES, LIGHTING FIXTURES, ETC.
2.MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
3.IT WILL NOT BE LOOSENED BY SHANK.
4.THE INNER AND OUTER JOINS A GOOD LOOKING.
5.HELPS REDUCE STOCK RANGE.
6.PARTICULAR DOME HEADS ACCEPTABLES.
7.FINISH AVAILABLE IN A MULTIPLE OF COLORS.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
Leveling Screw
adjusting screws for bringing an instrument or other object into level
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
TSC 5 SELF-CLINCHING LOCK NUTS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
I. HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
MULTI-GRIP BLIND RIVET
MATERIAL AVALIABLE:
RIVET: ALUMINUM 5052
MANDREL: STEEL 1022
SUITABLE APPLICATIONS:
1.AUTOMOBILES, MOTORCYCLES, ELECTRCAL APPLIANCES, LIGHTING FIXTURES, ETC.
2.MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
3.IT WILL NOT BE LOOSENED BY SHANK.
4.THE INNER AND OUTER JOINS A GOOD LOOKING.
5.HELPS REDUCE STOCK RANGE.
6.PARTICULAR DOME HEADS ACCEPTABLES.
7.FINISH AVAILABLE IN A MULTIPLE OF COLORS.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SPEED PIN RIVET / DRIVE PIN RIVETMATERIAL AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET):
BODY: ALUMINUM 2117 / STAINLESS STEEL 302 (INOX A2/18-8) / STEEL 1006
PIN: ALUMINUM 2024 / STAINLESS STEEL 304 (INOX A2/18-8) / STEEL 1022
FINISH SURFACE AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET):
PLATING: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED/ CR3 BLACK ZINC PLATED/ ANODIZED/CLEAN
ADVANTAGES OF SPEED PIN RIVET (DRIVE PIN RIVET):
1.SPEED PIN RIVET IS FAST AND EASY TO INSTALL.
2.NO SPECIAL INSTALLATION TOOL IS REQUIRED FOR SPEED PIN RIVET, JUST A HAMMER WILL DO.
3.VARIOUS MATERIALS ARE AVAILABLE FOR SPEED PIN RIVET.
4.VARIOUS HEAD STYLES ARE AVAILABLE FOR SPEED PIN RIVET.
5.SPEED PIN RIVET WILL NOT DAMAGE THE APPLICATION SURFACE
6.SPEED PIN RIVET CAN BE RUST RESISTANT.
7.SPEED PIN RIVET CAN BE APPLIED TO WIDE THICKNESS.
8.THE APPEARANCE LOOKS GOOD AFTER INSTALLATION.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
★Available Size:5/32"、5/16"、3/16"、3/8"、1/8"、1/4"、
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SQUARE BLIND JACK NUT
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.The Square Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials.
2.When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.
3.Standard blind jack nut are manufactured of steel with a commercial zinc plating.
4.All blind jack nuts can be supplied with brass coated which assist galvanic corrosion concerns.
MATERIAL AVAILABLE : STEEL, STAINLESS STEEL304, BRASS
FEATURES：
1.FASTENS IN BLIND HOLES
2.FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
3.NOT HOLE SIZE SENSITIVE
4.SUITABLE FOR WIDE GRIP RANGE
topscrew1975 發表在 痞客邦 留言(0) 人氣()
SMALL FLANGE & FLAT HEAD BLIND RIVET NUT
SMALL FLANGE BLIND RIVET NUT, OPEN END
SEM, SAM, SAI SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT. THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL,
LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
FLAT HEAD BERYNUT, OPEN END
BEM, BAI, SERIES
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
BLIND RIVET NUT HAND TOOL
NOSE - CHOOSE THREE FROM :
M3, M4, M6, M8 8-32, 10-24, 10-32, 1/4-20, 5/16-18
CHARACTERRISTICS OF BLIND RIVET NUT HAND TOOL：
Install without producing any harmful mark. Easy, fast & safe installation.
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
Company Profile (2)
