(未設定內容)
BLIND RIVET NUT HAND TOOL
NOSE - CHOOSE THREE FROM :
M3, M4, M6, M8 8-32, 10-24, 10-32, 1/4-20, 5/16-18
CHARACTERRISTICS OF BLIND RIVET NUT HAND TOOL：
Install without producing any harmful mark. Easy, fast & safe installation.
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
I. HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SPLINED RIVET NUT
SMALL FLANGE, SPLINED RIVET NUT
TSSS SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: EASY AND FAST INSTALLATION,
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
LARGE FLANGE, SPLINED RIVET NUT
TSBS SERIES
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SELF TAPPING THREAD INSERTS
SLOTTED SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.
APPICATIONS:
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
SELF TAPPING THREAD INSERTS - SLOTTED SERIES
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SMALL FLANGE & FLAT HEAD BLIND RIVET NUT
SMALL FLANGE BLIND RIVET NUT, OPEN END
SEM, SAM, SAI SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT. THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL,
LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
FLAT HEAD BERYNUT, OPEN END
BEM, BAI, SERIES
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
topscrew1975 發表在 痞客邦 留言(0) 人氣()
BLIND RIVET NUT-WATERPROOF
SMALL FLANGE RIVET NUT, CLOSED END
SAM-C, SAI-C SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL
GENERAL LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
BINDING POST
CHICAGO SCREW
MATERIAL AVALIABLE:
ALUMINUM, BRASS, STAINLESSSTEEL
SURFACE FINISH AVALIABLE:
CLEAN
GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
BLIND RIVET NUT-WATERPROOF
LARGE FLANGE SPLINED RIVET NUT, CLOSED END
TSBS-C SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056
SURFACE FINSIH AVAILABLE:
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN
CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.
THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.
ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL
GENERAL LIGHT FABRICATION
★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST
★ NOTE: K= KNURLED BODY
topscrew1975 發表在 痞客邦 留言(0) 人氣()
(未設定內容)
E SELF-DRIVING NUT
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL AND BRASS
ADVANTAGES:
1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.
2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.
3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
4.INSTALL INTO VARIES MATERIAL.
5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.
6.EASY, FAST & SAFE INSTALLATION.
INSTRUCTIONS OF E-SELF DRIVING NUT:
AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.
FEATURE OF E-SELF DRIVING NUT
(COMPARE WITH SEX BOLTS)
I. ROUND BODY WITH FANGSON IT
1.GRIP THE APPLICATION TIGHTLY
2.CANNOT BE DISASSEMBLED EASILY
3.PREVENT ANY ONE WHO INTENT TO PULL OUT
II. SCREW HEADCAN BE YOUR CHOICE
1.THE SCREW HEAD CAN BE TAMPERPROOF
2.HARDLY TO DISASSEMBLED
3.COMBINE WITH GOOD SURFACE OUTLOOK
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
topscrew1975 發表在 痞客邦 留言(0) 人氣()
Company Profile (2)
