單向公母套
ONE WAY SEX BOLTS
單向公母套之材質： 鐵、白鐵、銅。
單向公母套之表面處理： 依客戶要求。
★ 其他尺寸和材質可依客戶要求訂製。
單向公母套之表面處理： 依客戶要求。
★ 其他尺寸和材質可依客戶要求訂製。
母套
螺絲
- Nov 23 Mon 2020 13:48
ONE WAY SEX BOLTS
單向公母套
- Nov 20 Fri 2020 13:48
SIX LOBE WITH PIN SEX BOLT
梅花帶PIN公母套
SIX LOBE WITH PIN SEX BOLT
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEMALE NUT
MALE SCREW
- Nov 19 Thu 2020 13:48
TRUSS COMBO HEAD POST SCREW
TRUSS COMBO HEAD POST SCREW
CHICAGO SCREW
CHICAGO SCREW
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 18 Wed 2020 13:48
SLOTTED TRUSS HEAD SEX BOLTS
SLOTTED TRUSS HEAD SEX BOLTS
MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 17 Tue 2020 13:48
TSC 8 BLIND PRESSED NUTS
TSC 8 BLIND PRESSED NUTS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 16 Mon 2020 13:48
TSC 7 SELF-CLINCHING STANDOFFS
TSC 7 SELF-CLINCHING STANDOFFS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 13 Fri 2020 13:48
TSC 6 SELF-CLINCHING STUDS
TSC 6 SELF-CLINCHING STUDS
MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS:
STEEL, STAINLESS STEEL
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STUDS：
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 12 Thu 2020 13:48
TSC 5 SELF-CLINCHING STANDOFFS
TSC 5 SELF-CLINCHING LOCK NUTS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 11 Wed 2020 13:48
TSC 4 SELF-CLINCHING STANDOFFS
TSC 4 SELF-CLINCHING NUTS
INSTALL THE CLINCHING PART - TSC4
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Nov 10 Tue 2020 13:48
TSC 1 SELF-CLINCHING STANDOFFS
ADVANTAGES OF CLINCHING PARTS:
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
★ STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
Company Profile (2)
