TOP SCREW METAL CORP.

AIR HYDRAULIC RIVETER

MODEL 706

RIVET SIZE：2.4mm(3/32"),3.2mm(1/8"),4.0mm(5/32"),4.8mm(3/16").

RIVET MATERIAL :  STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

CHARACTERRISTICS OF AIR HYDRAULIC RIVETER: EASY AND FAST TO USE

 TOP SCREW METAL CORP.

http://www.topscrew.com.tw

recept@topscrew.com.tw

T:886-4-7237159

F:886-4-7246640

A rivet is a metallic pin with ahead,used for uniting two plates or pieces of material together,by passing it through them and then beating or pressing down the point so that it shall spread out and for masecond head; apin orbolt headed or clinched at both ends.

 Before being installed a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the back-tail. On installation the rivet is placed in a punched or drilled hole, and the tail is upset or bucked, so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Because there is effectively a head on each end of an installed rivet, it can support tension loads, however it is much more capable of supporting shear loads. Bolts and screws are better suited for tension applications.

Fastenings used in traditional wooden boat building, like copper nails and clinch bolts which work on the same principle as the rivet but were in use long before the term rivet came about and they are usually classified among the nails and bolts respectively. 

(reference by Wikipedia)

Blind Rivet have some advantages:

• Blind Rviets provides strong holding for applcation.
• Blind Rivet are low in cost compare with Bolt and Nut.
• Blind Rivet are ideal for wide range application
• Blind Rivet are available in dome, countersunk or large flange style.
• Blind Rivet are fast and easy to install.
• Blind Rivdet are ideal for rust resistance appicatio

It could be used in aluminum window.

Top Screw Metal Corp.

TEL: +886-4-7237159 

FAX: +886-4-7246640

E-Mail: recept@topscrew.com.tw
http://www.topscrew.com.tw/

Blind rivets  as know as pop rivets, are tubular and supplied with a mandrel through the center. The blind rivet body is inserted in a hole in the materials to be joined. The tool is actuated and the jaws of the power operated or manual riveting tool grips the mandrel of the rivet. The blind rivet is set by pulling the mandrel head into the rivet body, expanding it, and forming a strong, tight, reliable joint. At a predetermined setting force, the mandrel breaks and falls away.

Stainless Steel Blind Rivet is  incorporated with a large blind head are excellent for thin sheet materials and corrosion resistant. It is meticulously fabricated with high emphasis on quality to make them free from all drawbacks and can be availed by our clients at leading market rates.

The advantage of Stainless Steel Blind Rivet:

• Provide strong holding for allpicaton
• Low in cost compare with bolt and nut.
• Ideal for wide range application.
• Available in dome, countersunk or large style.
• Fast and easy to install.
• Provide high tensile and shear strengt compare with alumiunm or steel.
• Ideal for rust resistance application. 
• High strength and corrosion resistant

  

Blind rivets  referred to as pop rivets, are tubular and supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off. These types of blind rivets have non-locking mandrels and are sometimes avoided for critical structural joints because the mandrels may fall out, due to vibration or other reasons, leaving a hollow rivet that will have a significantly lower load carrying capability than solid rivets. Furthermore, because of the mandrel they are more prone to failure from corrosion and vibration. Unlike solid rivets, blind rivets can be inserted and fully installed in a joint from only one side of a part or structure, "blind" to the opposite side.

Blind Rivets are available in flat head, countersunk head, and modified flush head with standard diameters of 1/8, 5/32 and 3/16 inch. Blind rivets are made from soft aluminum alloy, steel (including stainless steel), copper, and Monel.

(reference by Wikipedia)

Blind Rivet have some advantages:

• Blind Rviets provides strong holding for applcation.
• Blind Rivet are low in cost compare with Bolt and Nut.
• Blind Rivet are ideal for wide range application
• Blind Rivet are available in dome, countersunk or large flange style.
• Blind Rivet are fast and easy to install.
• Blind Rivdet are ideal for rust resistance appication.

  

Top Screw Metal Corp.

TEL: +886-4-7237159 

FAX: +886-4-7246640

E-Mail: recept@topscrew.com.tw

http://www.topscrew.com.tw/

A rivet is a metallic pin with ahead, used for uniting two plates or pieces of material together, by passing it through them and then beating or pressing down the point so that it shall spread out and for masecond head; apin orbolt headed or clinched at both ends.

 Before being installed a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the back-tail. On installation the rivet is placed in a punched or drilled hole, and the tail is upset or bucked, so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Because there is effectively a head on each end of an installed rivet, it can support tension loads, however it is much more capable of supporting shear loads. Bolts and screws are better suited for tension applications.

Fastenings used in traditional wooden boat building, like copper nails and clinch bolts which work on the same principle as the rivet but were in use long before the term rivet came about and they are usually classified among the nails and bolts respectively. 

(reference by Wikipedia)

Top Screw Metal Corp.

TEL: +886-4-7237159 

FAX: +886-4-7246640

E-Mail: recept@topscrew.com.tw
http://www.topscrew.com.tw/

ADVANTAGES OF BLIND RIVET:
-BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
-BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
-BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
-BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
-BLIND RIVETS ARE FAST AND EASY TO INSTALL.
-BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.
-BLIND RIVETS ARE IDEAL FOR LIGHT WEIGHT USAGE.

STAINLESS STEEL(INOX)/STAINLESS STEEL(INOX) BLIND RIVET

MATERIAL AVAILABLE FOR STAINLESS STEEL/ STAINLESS STEEL BLIND RIVETS TS. SSASS. SERIES:

RIVET:   STAINLESS STEEL 302/316 (INOX A2/A4/18-8/18-10)                                        
SHAFT: STAINLESS STEEL 302/316 (INOX A2/A4/18-8/18-10)

FINISH SURFACE AVAILABLE:
RIVET: SELF COULOURED                                        
SHAFT: SELF COULOURED                   

ADVANTAGES OF STAINLESS STEEL/STAINLESS STEEL BLIND RIVET:
1. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
2. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
3. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
4. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
6. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS PROVIDE HIGH TENSILE AND SHEAR STRENGT COMPARE WITH ALUMINUM  OR STEEL.
7. STAINLESS STEEL/STAINLESS STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

STAINLESS STEEL(INOX)/STEEL BLIND RIVET

MATERIAL AVAILABLE FOR STAINLESS STEEL/ STEEL BLIND RIVETS TS.SSAS. SERIES:

RIVET:   STAINLESS STEEL 302/316 (INOX A2/A4/18-8/18-10)
SHAFT:  STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
RIVET:  SELF COULOURED
SHAFT:  CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF STAINLESS STEEL/STEEL BLIND RIVET:
1. STAINLESS STEEL/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
2. STAINLESS STEEL/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
3. STAINLESS STEEL/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
4. STAINLESS STEEL/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5. STAINLESS STEEL/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
6. STAINLESS STEEL/STEEL BLIND RIVETS PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM  OR STEEL.
7. STAINLESS STEEL/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

STEEL/STEEL BLIND RIVET

MATERIAL AVAILABLE FOR STEEL/ STEEL BLIND RIVETS TS.SAS. SERIES:
RIVET:   STEEL 1006
SHAFT: STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
PLATING: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED/ CR3 BLACK ZINC PLATED/ CR3 ZINC NICKEL PLATED ... ETC.
COLOURED: YELLOW/ RED/ BLACK/ WHITE ... ETC.　

ADVANTAGES OF STEEL/STEEL BLIND RIVET:
1. STEEL/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
2. STEEL/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
3. STEEL/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
4. STEEL/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5. STEEL/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
6. STEEL/STEEL BLIND RIVETS PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM.
7. STEEL/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

ALUMINUM/STEEL BLIND RIVET

MATERIAL AVAILABLE FOR ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES:
RIVET:   ALUMINUM 5050
SHAFT: STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
RIVET:   SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED...ETC
SHAFT:  CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF ALUMINUM/STEEL BLIND RIVET:
1. ALUMINUM/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
2. ALUMINUM/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
3. ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
4. ALUMINUM/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5. ALUMINUM/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
6. ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.
7. ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR LIGHT WEIGHT USAGE.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST