TOP SCREW METAL CORP.

TSC 7

SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS:

  * May be installed using any parallel acting squeezing force.

  * Provide high pushout and torque-out resistance.

  * Do not require special hole preparation, such as chamfering and deburring.

  * Reverse side of metal sheet remains flush.

  * No retapping necessary after application.

  * Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.

TSC 6

SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

ADVANTAGES OF CLINCHING PARTS:

  * May be installed using any parallel acting squeezing force.

  * Provide high pushout and torque-out resistance.

  * Do not require special hole preparation, such as chamfering and deburring.

  * Reverse side of metal sheet remains flush.

  * No retapping necessary after application.

  * Low installed costs.

★ STUDS：

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

★ Other sizes, material are available upon request.

TSC 5

SELF-CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS:

  * May be installed using any parallel acting squeezing force.

  * Provide high pushout and torque-out resistance.

  * Do not require special hole preparation, such as chamfering and deburring.

  * Reverse side of metal sheet remains flush.

  * No retapping necessary after application.

  * Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal.

Threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.

TSC 4

SELF-CLINCHING NUTS

★ CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART - TSC4

ADVANTAGES OF CLINCHING PARTS:

  * May be installed using any parallel acting squeezing force.

  * Provide high pushout and torque-out resistance.

  * Do not require special hole preparation, such as chamfering and deburring.

  * Reverse side of metal sheet remains flush.

  * No retapping necessary after application.

  * Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.

TSC 1

SELF-CLINCHING STANDOFFS

★ CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART - TSC1

ADVANTAGES OF CLINCHING PARTS:

  * May be installed using any parallel acting squeezing force.

  * Provide high pushout and torque-out resistance.

  * Do not require special hole preparation, such as chamfering and deburring.

  * Reverse side of metal sheet remains flush.

  * No retapping necessary after application.

  * Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.

TSC1 SELF CLINCHING STANDOFFS

TSC6 SELF CLINCHING STUDS

TSC7 SELF CLINCHING STANDOFFS

TSC8 SELF CLINCHING NUTS

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 - NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP SCREW METAL CORP.

www.topscrew.com.tw

recept@topscrew.com.tw

(nnovacera / bolts and nuts / screw / fastener)

SELF CLINCHING PARTS

SELF CLINCHING STUD

TSC6

MATERIAL: STEEL

PLATING: ZINC PLATED

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

- STUDS

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

TOP SCREW METAL COPR.

http://www.topscrew.com.tw

recept@topscrew.com.tw

TEL: 886-4-7237159

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

ADVANTAGES OF CLINCHING PARTS:

•    PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.

•    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

•    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

•    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

•    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

•    NO RETAPPING NECESSARY AFTER APPLICATION.

•    LOW INSTALLED COSTS.

 - NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

• PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
• MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
• PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
• DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
• REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
• NO RETAPPING NECESSARY AFTER APPLICATION.
• LOW INSTALLED COSTS.

 - STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

CLINCHING PARTS：PRESS NUT

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★NUTS：
NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SELF-CLINCHING STUDS’S HEAD SHAPE IS ROUND AND HEXAGON, BELOW THE HEAD IS A CASTLE SHAPED GROOVES.

SELF-CLINCHING ARE PRESSED INTO A HOLE IN A SHEET TO BE INSTALLED, IT WITH HIGH TORQURE-OUT AND PUSHOUT RESISTANCE, WHICH REACHED SAVE TIME AND EFFORT, SAVE SPACE, AND SAVE MONEY.

SELF-CLINCHING STUDS CAN BE WIDELY USED IN MOBILE PHONES, DIGITAL CAMERAS, MP3, DV, V8, REMOTE CONTROL, AUDIO AND ELECTRICAL SWITCHES, CONTROL PANELS AND OTHER PRODUCTS OF THE SHELL.

INSTALL SELF-CLINCHING STUDS DO NOT NEED SPECIAL DRILL HOLE.

TOPSCREW METAL CORP. CAN PROVIDE STEEL, STAINLESS STEEL, AND OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST.

PEM nut is a threaded fastener or stand-off that is attached to sheet of metal. They are attached by being pressed with great force so that the end of the nut is expanded in order to stay locked and clinched into the sheet metal

A PEM nut also known  as Self-clinching whcih is an internally threaded fastener, when pressed into ductile metal, displaces the host material around the mounting hole, causing it to cold flow into a specially designed annular recess in the shank of the fastener. A serrated clinching ring prevents the fastener from rotating in the host material once it have been properly inserted. Thus a PEM nut becomes a permanent part of the host material offering strong, load bearing threads in relatively thin sheets of metal.  The generic term for this type of fastener is "self-clinching nut".

(Reference by Wikipedia)

Advantage of Self-Clinching parts:

• Provide strong threads in metal as thin as 0.20"/.51MM
• Maybe installed using any parallel acting squeezing force.
• Provide high pushout and torque-out resistance
• Do not require special hole preparation, such as chamfering and deburring.
• Reverse side of metal sheet remains flush.
• No retapping necessary after application
• Low installed costs. 

Top Screw Metal Corp.

TEL: +886-4-7237159 

FAX: +886-4-7246640

E-Mail: recept@topscrew.com.tw
http://www.topscrew.com.tw/

TSC8 BLIND PRESSED NUT

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★NUTS：
NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC7 SELF CLINCHING STANDOFFS

MATERIAL AVAILABLE FOR SELF-CLINCHING STANDOFFS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC6 SELF CLINCHING STUDS

★CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART-TSC6

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★STUDS：
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC5 CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★NUTS：
NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC4 SELF CLINCHING NUTS

★CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART-TSC4

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★NUTS：
NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC1 SELF CLINCHING STANDOFFS

★CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART-TSC6

ADVANTAGES OF CLINCHING PARTS:
1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020" / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

★STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST