TOP SCREW METAL CORP.

2016年 4月11日 ~ 4月13日

將於高雄展覽館參展

歡迎蒞臨參觀

詳細訊息請詳見 → http://www.fastenertaiwan.com.tw/zh_TW/index.html

BLIND JACK NUT

STEEL

STAINLESS STEEL

l   The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials.

l   When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.

l   Standard blind jack nut are manufactured of steel with a commercial zinc plating.

l   All blind jack nuts can be supplied with brass coated which assist galvanic corrosion concerns.

MATERIAL AVAILABLE：

STEEL, STAINLESS STEEL304, BRASS

FEATURES：

l   FASTENS IN BLIND HOLES

l   FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES

l   NOT HOLE SIZE SENSITIVE

l   SUITABLE FOR WIDE GRIP RANGE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL

★ CLICK ME TO SEE HOW TO INSTALL BLIND JACK NUT BY  BLIND JACK NUT TOOL

ST SERIES

KNURLED THREAD INSERT

MATERIAL AVALIABLE：STEEL

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND RIVET SERIES - ALUMINUM / STEEL BLIND RIVET

TS、AAS SERIES

★ CLICK ME TO SEE HOW TO INSTALL BLIND RIVET

MATERIAL AVALIABLE：

RIVET：ALUMINUM 5050

SHAFT：STEEL 1018~1022

FINISH SURFACE AVALIABLE：

RIVET： SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED...ETC

SHAFT: ：CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF AL-ST BLIND RIVET：

PROVIDE STRONG HOLDING FOR APPLICATION.

LOW IN COST COMPARE WITH BOLT AND NUT.

IDEAL FOR WIDE RANGE APPLICATION.

AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.

FAST AND EASY TO INSTALL.

IDEAL FOR RUST RESISTANCE APPLICATION.

IDEAL FOR LIGHT WEIGHT USAGE.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND RIVET NUT  - SMALL FLANGE & FLAT HEAD BLIND RIVET NUT

SMALL FLANGE BLIND RIVET NUT OPEN END

SEM、SAM、SAI SERIES

FLAT HEAD BERYNUT OPEN END

BEM、BAI、SERIES

★ HOW TO INSTALL BLIND RIVET NUT BY HAND TOOL

★ HOW TO INSTALL BLIND RIVET NUT BY AIR PULL SETTER

★ HOW TO INSTALL BLIND RIVET NUT BY AIR RIVETING NUT TOOL

MATERIAL AVAILABLE：

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE：

STEEL：CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL：CLEAN OR PASSIVATED

BRASS：CLEAN

ALUMINUM：CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT：

THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.

THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.

THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.

THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.

APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES：

EASY AND FAST INSTALLATION.

HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS：

AUTOMATIVE、ELECTRICAL ENGINEERING、SHEET METAL、GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

SIX LOBE WITH PIN SIX BOLTS - SECURITY SYSTEM

MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SELF TAPPING THREADED INSERT SERIES

◆  SLOTTED PART

MATERIAL AVAILABLE：
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604

SURFACE FINSIH AVAILABLE：
CR3 WHITE/YELLOW ZINC PLATED

CHARACTERISTICS：
•EASY TO INSTALLED
•DESIGNED TO REPLACE SPRING COIL
•PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC
•ABLE TO INSTALL FOR VIBRATING ENVIRONMENT

APPICATIONS：
•CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
•DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.

◆ THREE HOLE THIN WALL/THICK WALL

MATERIAL AVAILABLE：
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE：
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ THREE HOLE W. SLOTTED PIN

MATERIAL AVAILABLE：
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THIN WALL OR CLOSE TO AN EDGE

ADVANTAGE：
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ MANUAL INSTALLATION TOOL

HOLE SIZE：
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

HOLE DEPTH：
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

◆ AIR INSTALLATION TOOLS

STAINLESS STEEL BLIND JACK NUTS

FOR LATEST TYPE LICENSE PLATE

The latest type license plates’ width and height are different from the original license plate. In addition, when you replace the license plate, you find that the holes place of the latest type license plate and the bodywork are not matched.

HOW TO SOLVE？

YOU JUST NEED OUR PRODUCT

☆ STAINLESS STEEL BLIND JACK NUT ☆

The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials. When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.

INSTALLATION STEPS FOR BLIND JACK NUT：

★ CLICK ME TO SEE HOW TO INSTALL BLIND JACK NUT BY  BLIND JACK NUT TOOL

★ CLICK ME TO SEE HOW TO INSTALL BLIND JACK NUT BY AIR PULL SETTER

ADVANTAGE：

AVOID CORROSION

PREVENT RUST

SUITABLE FOR OUTDOOR

FEATURES：

FASTENS IN BLIND HOLES

FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES

NOT HOLE SIZE SENSITIVE

SUITABLE FOR WIDE GRIP RANG

INSTALLATION STEPS FOR BLIND JACK NUT：

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT

STEEL

STAINLESS STEEL

l   The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials.

l   When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.

l   Standard blind jack nut are manufactured of steel with a commercial zinc plating.

l   All blind jack nuts can be supplied with brass coated which assist galvanic corrosion concerns.

★ CLICK ME TO SEE HOW TO INSTALL BLIND JACK NUT BY  BLIND JACK NUT TOOL

★ CLICK ME TO SEE HOW TO INSTALL BLIND JACK NUT BY AIR PULL SETTER

MATERIAL AVAILABLE：

STEEL, STAINLESS STEEL304, BRASS

FEATURES：

l   FASTENS IN BLIND HOLES

l   FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES

l   NOT HOLE SIZE SENSITIVE

l   SUITABLE FOR WIDE GRIP RANGE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST