FRAME SCAFFOLDING FLIP LOCK PIN
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
APPLICATION IN FRAME SCAFFOLDING
APPLICATION IN FRAME SCAFFOLDING
- Nov 02 Mon 2020 13:48
FRAME SCAFFOLDING FLIP LOCK PIN
- Oct 30 Fri 2020 13:48
UNDERCUT ANCHOR,EXPANSION ANCHOR
EXPANSION ANCHOR
UNDERCUT ANCHOR
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEATURES OF ANCHOR BOLT:
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED
ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:
FEATURES OF ANCHOR BOLT:
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED
ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:
ADVANTAGE & BENEFIT OF ANCHOR BOLT:
1.INVISIBLE FROM FRONT OF FAÇADE
2.STRESS-FREE FIXING IN NATURAL STONE
3.MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
4.FAST & EASY INSTALLATION OF REVEAL
5.STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%
FIELDS OF APPLICATION:
1.CURTAIN WALL INSTALLATION
2.BUILDING CURTAIN GLASS INSTALLATION
3.MARBLE INSTALLATION
4.STRENGTHENED GLASS INSTALLATION
EXAMPLE:
- Oct 29 Thu 2020 16:52
BINDING POST
BINDING POST
CHICAGO SCREW
CHICAGO SCREW
MATERIAL AVALIABLE:
ALUMINUM, BRASS, STAINLESSSTEEL
SURFACE FINISH AVALIABLE:
CLEAN
GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
ALUMINUM, BRASS, STAINLESSSTEEL
SURFACE FINISH AVALIABLE:
CLEAN
GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 28 Wed 2020 16:46
SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE
SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE
W. THREE CUTTING HOLE
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
- Oct 27 Tue 2020 16:45
SELF TAPPING THREADED INSERT W. SLOTTED PIN
SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE
W. THREE CUTTING HOLE
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION
- Oct 26 Mon 2020 16:21
SELF TAPPING THREAD INSERTS - SLOTTED SERIES
SELF TAPPING THREAD INSERTS
SLOTTED SERIES
SLOTTED SERIES
MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.
APPICATIONS:
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.
APPICATIONS:
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
SELF TAPPING THREAD INSERTS - SLOTTED SERIES
- Oct 23 Fri 2020 16:08
SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS
SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
MANUAL INSTALLATION TOOLS
I. HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
- Oct 22 Thu 2020 15:45
LOKSERT-TOOL
LOKSERT-TOOL
- Oct 21 Wed 2020 15:01
LOKSERT-STANLESS
LOKSERT-STANLESS
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
- Oct 20 Tue 2020 16:44
LOKSERT-STEEL
LOKSERT-STEEL
Solid bushing utilising locking keys provides positive mechanical lock against rotation.
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
Solid bushing utilising locking keys provides positive mechanical lock against rotation.
High strengt and reliability provides maximum pullout strength.
Installed using standard drills and taps.
Simple installation - no special skills required.
Suitable for use in a wide range of parent materials.
Impossible to cross thread during installation.
Simple removal process if required.
No tang to break and remove.
Available in metric sizes, inch sizes and spark plug sizes.
Available in Thinwall and Heavy Duty.
Material: Steel/ Stainless Steel
Company Profile (2)
